请搜索 制冷加热控温系统 超低温冷冻机 制冷加热控温控流量系统(汽车防冻液) 制冷加热控温系统(气体) TCU控温单元

TES-6A15WPEX / TES-6A15WDEX

Product parameter

  • Power:28kW
  • Heating power:15kW
  • Flow:110L/min
  • Pressure:2.5bar
  • Temperature control accuracy:±0.5℃

LNEYA represents the international advanced liquid temperature control technology, actively explores and studies component testing systems, mainly used for temperature test simulation in semiconductor testing, with wide temperature orientation and high temperature rise and fall, temperature range -92°C ~ 250°C, suitable for various Test Requirements. LNEYA is committed to solving the problem of temperature control lag in electronic components. Ultra high temperature cooling technology can be cooled directly from 300°C.

This product is suitable for precise temperature control of electronic components. In the manufacture of semiconductor electronic components for harsh environments, the IC packaging assembly and engineering and production testing phases include electronic thermal testing and other environmental testing simulations at temperatures (-45°C to +250°C). Once put into practical use, these semiconductor devices and electronic products can be exposed to extreme environmental conditions to meet demanding military and telecommunications reliability standards.

 Model TES-6A15WPEX
TES-6A15WDEX
Temp Range -60℃~200℃
Heating Power 15kW
Refrigerating Output 200℃ 15kW
100℃ 15kW
20℃ 15kW
0℃ 15kW
-20℃ 12kW
-40℃ 8kW
-50℃ 5kW
-55℃ 3kW
Temp Control Accuracy Of Heat Conduction Medium ±0.5℃
Fuel Temp Control Accuracy ±2℃ Steady State
System Pressure Display Pressure of Refrigeration system is realized by pressure gauge (High pressure, low pressure);
Pressure of circulatory system is detected by pressure sensor and displayed on touch screen.
Controller Siemens PLC, Fuzzy PID Control algorithm with Cascade Control algorithm.
Temperature Control Temperature Control Mode for outlet of Heat conduction medium;
External temperature sensor: (PT100 or 4~20mA or communication given) control mode (cascade control).
Communicating Protocol Ethernet Interface TCP/IP Protocol
Internal Temp Feedback Equipment heat conduction medium outlet temperature, medium inlet temperature, refrigeration system condensation temperature, positive pressure chamber ambient temperature, compressor suction temperature, cooling water temperature (water-cooling equipment is configured).
External Access Temp Feedback PT100 or 4~20mA or communication given
Cascade Control Time The temperature difference between the outlet temperature and the external temperature sensor can be set and controlled;
TempDifference Control Function The temperature difference between the inlet temperature and the outlet temperature of the equipment can be set to be controlled (to protect the safety of the system).
Closed-cycle System The whole system is a completely closed system with no oil mist at high temperature and no water in the air at low temperature. The system will not increase the pressure due to high temperature and automatically replenish the heat conduction medium at low temperature.
Heating The maximum heating output power of the system (according to each model);
The heater has triple protection and independent temperature limiter to ensure the safety of heating system;
Heating power 10kW adopts regulator, heating power output control adopts 4~20mA linear control.
Refrigerating Capacity Refers to the ability to take away heat at different temperatures (ideal condition), the actual working conditions need to consider environmental heat dissipation, please enlarge properly, and do a good job of insulation measures.
High Temp Cooling Module From the high temperature 200 degrees cooling module.
Circulating pump flow max Magnetic drive pump with crown magnetic drive pump/ German brand.
110L/min 2.5BAR
Source 380V 50HZ 28kW max
Shape Size (Positive Pressure)cm 135 *145*225
External Dimension (Isolation)mm 800*1450*1850
Compression Engine Italy Duling semi-enclosed compressor / BiZell semi-enclosed compressor.
Evaporimeter Adopting DANFOSS Plate Heat Exchanger / High strength Plate Heat Exchanger
Refrigeration Accessory Oil separator, dry filter, thermal expansion valve, electronic expansion valve, refrigeration solenoid valve, pressure control, mirror, etc. All adopt Emerson / Danvers brand.
Operation Panel Color touch screen, temperature curve display\ EXCEL data export.
Safe Guarding With self-diagnosis function; phase sequence phase breaker, freezer overload protection; high-voltage pressure switch, overload relay, thermal protection device and other safety protection functions.
Cryogen R-404A R23 mixed refrigerant
Interface Size DN32 PN10 RF
Water-Cooled W Type W is water cooled.
Water-cooled Condenser Casing heat exchanger / tube heat exchanger.
Cooling Water Quantity At 32℃ 5m3/h
Shell material Cold rolled sheet spray (Standard Colour 7035)
Barotropic Explosion Protection Positive pressure blast proof (EXPXdmbIICT4) barotropic system must be water-cooled equipment;
Wuxi Guansub explosive proof product installation license number: PCEC-2017-B025
Barotropic System Cooling A constant temperature cooling system is installed inside the barotropic system to ensure that the ambient temperature of the barotropic chamber is below 45℃
Navar LNEYA
Expansion System LNEYA
Intermediate Relay\ Thermal Relay Intermediate relays, thermal relays, contactors, circuit breakers, etc., all use Schneider and other brands.
Temperature Sensor Tiankang
Explosion-proof Hose Tu’an explosion-proof threading hose
Internal&External Control This\ External control mode is switchable

详细参数

最高工作温度

200℃

最低工作温度

-60℃

电源功率

20~50kW

控温模式

导热油温度控制

控温精度

±0.5℃

国内外展览

LNEYA每年都会参加各种国内外展览。在展览中,我们展示了LNEYA最新的研究设备。每年,长期合作的客户都会前来参展,与我们交流。我们还积极开发新客户,为他们提供高质量的机器和服务。

售后服务

质量保证

保证销售的货物符合合同规定,出厂检验合格的新产品、质量性能、技术指标和配置符合合同规定的制造商和技术文件。

安装调试

货物到货后,我公司或我公司代理负责安装调试需要现场安装调试的设备。

验收

安装调试完成后,经客户验收,确认货物符合合同规定,合格的新产品、质量性能、技术指标和配置符合合同规定的厂家和技术文件,并在全套技术文件确认后,签署安装验收报告并确认验收。

训练

在设备安装调试的同时,我公司的售后服务工程师负责对用户进行技术培训,直至用户熟练操作。在客户使用设备的过程中,客户可随时向我公司售后服务人员咨询相关技术问题,我公司将根据情况安排现场或远程培训。

售后服务承诺

自验收之日起一年的完全免费保修,在保修期内,所有维修和备件均免费(因人为因素导致的设备故障将从备件成本价中收取费用);保修期结束后,我们将负责设备的终身维护,根据实际维护费用收取相应费用。

(注:如果客户需要现场服务,将收取额外费用。客户需要先描述问题,然后提前发送一些失败的图片或视频,然后无锡冠亚恒温制冷技术有限公司判断是否可以在现场进行售后服务。)

获得免费解决方案

loading...

购物车

X

我的足迹

X